logo
Flash Sintering Laboratory

Indian Institute of Technology, Patna

devinder@iitp.ac.in
(Institute)
+91-612-302-8752
(office)

PUBLICATION

Peer Reviewed Journals

  1. Pranav Rai, SCJ Daniel, R Damodaram, Devinder Yadav, Microstructural Characterization, Mechanical Properties and Thermal Stability of Friction Surfaced Inconel 718 Coatings, Metallurgical and Materials Transactions A, 2023.
  2. Raghav Mundra, Tarini Prasad Mishra, Martin Bram, Olivier Guillon, Devinder Yadav, Sintering behaviour of 8YSZ-Ni cermet: Comparison between conventional, FST/SPS and flash sintering, International Journal of Applied Ceramic Technology, 2023.
  3. Chandan Singh, Jolanta Prywer, Devinder Yadav, On the Three-Dimensional Morphology of In Situ Grown TiB2 Particles in Molten Aluminum, Journal of Materials Engineering and Performance, 2023.
  4. Devinder Yadav, Yakun Yuan, Venkatraman Gopalan, Rishi Raj, Seohyeon Jo, Room temperature flash of single crystal titania: Electronic and optical properties, Journal of the American Ceramic Society, (2022).
  5. Subhadip Bhandari, Tarini Prasad Mishra, Martin Bram, Olivier Guillon, Devinder Yadav, Flash sintering behaviour of 8YSZ-NiO composites, Ceramics International, (2022).
  6. Kumar Sadanand Arya, Ammar Eqbal, Pranav Rai, Devinder Yadav, Tamoghna Chakrabarti, Investigation on The Role of Joule Heating on Flash Sintering Using a Combined Experimental and Modeling Approach, Journal of the American Ceramic Society, (2022).
  7. Subhadip Bhandari, Tarini Prasad Mishra, Olivier Guillon, Devinder Yadav, Martin Bram, Accessing the role of Joule heating on densification during flash sintering of YSZ, Scripta Materialia, 211 (2022) 114508.
  8. R Damodaram, P Rai, SCJ Daniel, R Bauri, D Yadav, Friction surfacing: A tool for surface crack repair, Surface and Coatings Technology, 422 (2021) 127482.
  9. Rushi K Kathiria, Seohyeon Jo, Rishi Raj, Devinder Yadav, In‐flash‐immersion‐and‐quench of yttria stabilized zirconia into liquid nitrogen yields an electronic conductor, Journal of the American Ceramic Society, (2021).
  10. R. Kalsar, Devinder Yadav, A. Sharma, H.-G. Brokmeier, J. May, H.W. Höppel, W. Skrotzki, S. Suwas, Effect of Mg content on microstructure, texture and strength of severely equal channel angular pressed aluminium-magnesium alloy, Materials Science and Engineering A, In press, Aug 2020.
  11. Amlan Kar, Devinder Yadav, Satyam Suwas, Satish V. Kailas, Role of plastic deformation mechanisms during the microstructure evolution and intermetallic formation in dissimilar friction stir weld, Materials Characterization, 164 (2020) 110371.
  12. B. Yoon, Devinder Yadav, S. Ghose, P. Sarin, Rishi Raj, On the synchronicity of flash sintering and phase transformation, Journal of the American Ceramic Society, 102 (2019) 3110-3116.
  13. X. Vendrell, Devinder Yadav, Rishi Raj, A.R. West, Influence of flash sintering on the ionic conductivity of 8 mol% yttria stabilized zirconia, Journal of the European Ceramic Society, 39 (2019) 1352-1358.
  14. A.K. Srivastav, N. Chawake, Devinder Yadav, N.S. Karthiselva, B.S. Murty, Localized pore evolution assisted densification during spark plasma sintering of W-5wt.%Mo alloy, Scripta Materialia, 159 (2019) 41-45.
  15. Punith Kumar M.K., Devinder Yadav, J.-M. Lebrun, Rishi Raj, Flash sintering with current- rate: A different approach, Journal of the American Ceramic Society, 102 (2019) 823-835.
  16. B. Yoon, Devinder Yadav, S. Ghose, Rishi Raj, Reactive flash sintering: MgO and α-Al 2 O 3 transform and sinter into single-phase polycrystals of MgAl 2 O 4 . Journal of the American Ceramic Society, 102 (2019) 2294-2303.
  17. D. Kok, Devinder Yadav, E. Sortino, S.J. McCormack, K.P. Tseng, W.M. Kriven, Rishi Raj, M.L. Mecartney, α-alumina and spinel react into single phase high-alumina spinel in <3 seconds during flash sintering. Journal of the American Ceramic Society, 102 (2019) 644-653.
  18. Devinder Yadav, R. Bauri and N. Chawake, Fabrication of Al-Zn solid solution via friction stir processing. Materials Characterization, 136 (2018) 221-228.
  19. B. Yoon, Devinder Yadav, Rishi Raj, E.P. Sortino, S. Ghose, P. Sarin and D. Shoemaker, Measurement of O and Ti atom displacements in TiO 2 during flash sintering experiments. Journal of the American Ceramic Society, 101 (2018) 1811-1817.
  20. A. Mohammad, A.M. Al-Ahmari, V.K. Balla, M. Das, S. Datta, Devinder Yadav and G.D.J Ram, In vitro wear, corrosion and biocompatibility of electron beam melted γ-TiAl. Materials and Design, 133 (2017) 186-194.
  21. Devinder Yadav and Rishi Raj, Two unique measurements related to flash experiments with yttria stabilized zirconia. Journal of the American Ceramic Society, 100 (2017) 5374-5378.
  22. Devinder Yadav and Rishi Raj, The onset of the flash transition in single crystals of cubic zirconia as a function of electric field and temperature. Scripta Materialia (Viewpoint Article) 134 (2017) 123-127.
  23. N.S. Kartheselva, S. Kashyap, Devinder Yadav, B.S. Murty and S.R. Bakshi, Densification mechanisms during reactive spark plasma sintering of titanium diboride and zirconium diboride. Philosophical Magazine, 97 (2017) 1588-1609.
  24. Ajay K.P., Devinder Yadav, C.S. Perugu and S.V. Kailas, Influence of particle reinforcement on microstructure evolution and tensile properties of in-situ polymer derived MMC by friction stir processing. Materials and Design, 113 (2017) 99-108.
  25. C.N.S. Kumar, R. Bauri and Devinder Yadav, Wear properties of 5083 Al-W surface composite fabricated by friction stir processing. Tribology International, 101 (2016) 284- 290.
  26. N. Chawake, N.T.B.N. Koundinya, S. Kashyap, A.K. Srivastav, Devinder Yadav, R. Mondal and R.S. Kottada, Formation of amorphous alumina during sintering of B2 aluminides. Materials Characterization, 119 (2016) 186-194.
  27. Devinder Yadav, R. Bauri, A. Kauffmann and J. Freudenberger, Al-Ti particulate composite: Processing and studies on particle twinning, microstructure and thermal stability. Metallurgical and Materials Transactions A, 47 (2016) 4226-4238.
  28. M. Lodhe, N. Chawake, Devinder Yadav and M. Balasubramanian, On correlation between Alpha → Beta transformation and densification mechanisms in SiC during spark plasma sintering. Scripta Materialia, 115 (2016) 137-140.
  29. A.K. Srivastav, J. Basu, S. Kashyap, N. Chawake, Devinder Yadav and B.S. Murty, Crystallographic-shear-phase-driven W18O49 nanowires growth on nanocrystalline W surfaces. Scripta Materialia, 115 (2016) 28-32.
  30. C.N. Shyam Kumar, Devinder Yadav, Ranjit Bauri and G.D. Janki Ram, Effect of ball milling and particle size on microstructure and properties of 5083 Al-Ni composites fabricated by friction stir processing. Materials Science and Engineering A, 645 (2015) 205-212.
  31. Devinder Yadav and Ranjit Bauri, Friction stir processing of Al-TiB 2 in situ composite: Effect on particle distribution, microstructure and properties. Journal of Materials Engineering and Performance, 24 (2015) 1116-1124.
  32. Ranjit Bauri, Devinder Yadav, C.N. Shyam Kumar, B. Balaji. Tungsten particle reinforced Al 5083 composite with high strength and ductility. Materials Science & Engineering A, 620 (2015) 67-75.
  33. Devinder Yadav and Ranjit Bauri, Development of Cu particle and Cu core shell particles reinforced Al composite. Materials Science and Technology, 31 (2015) 494-500.
  34. Devinder Yadav and Ranjit Bauri, Microstructure development in single and double pass friction stir processing of aluminium. Materials Science Forum, 753 (2013) 50-53.
  35. Devinder Yadav and Ranjit Bauri, Effect of friction stir processing on microstructure and mechanical properties of aluminium. Materials Science & Engineering A, 539 (2012) 85-92.
  36. Devinder Yadav and Ranjit Bauri, Microstructural characterisation of friction stir processed aluminium. Materials Science and Technology, 27 (2011) 1170-1176.
  37. Ranjit Bauri, Devinder Yadav and G. Suhas, Effect of friction stir processing on microstructure and properties of Al-TiC in situ composite. Materials Science & Engineering A, 528 (2011) 4732-4739.
  38. Devinder Yadav and Ranjit Bauri, Processing, microstructure and mechanical properties of nickel particle embedded aluminium matrix composite. Materials Science & Engineering A, 528 (2011) 1326-1333.
  39. Devinder Yadav and Ranjit Bauri, Nickel particle embedded aluminium matrix composite with high ductility. Materials Letters, 64 (2010) 664-667.

International Journals

  1. Ranjit Bauri, G.D. Janki Ram, Devinder Yadav and C.N. Shyam Kumar, Effect of process parameters and tool geometry on fabrication of Ni particle reinforced 5083 Al composite by friction stir processing. Materials Today: Proceedings, 2 (2015) 3203-3211.
  2. Ranjit Bauri, Devinder Yadav, C.N. Shyam Kumar and G.D. Janki Ram, Optimized process parameters for fabricating metal particle reinforced 5083 Al composite by friction stir processing. Data in Brief, 5 (2015) 309-313.