Patents
1. S. Raj, A. Shukla, M. Pathak, M.K. Khan, Stepped microchannel heat sink for cooling an electronic device, Indian Patent Granted on 01/02/2024,(Patent Number:502819).
2. A. A. Patel, M. Pathak, A. Ali, Hybrid solar tracking system for a solar collector and method thereof, Indian Patent Granted on 07/03/2024,(Patent Number:521830).,
Book Chapters
1. M. Pathak, 2012, Chapter 19: Numerical simulation of droplet dynamics in membrane emulsification systems, Numerical Simulation- From Theory to Industry, INTECH, ISBN: 978-953-51-0749-1.
2. M. Pathak, 2017, Chapter 5: Nanoemulsions and their stability for enhancing functional properties of food ingredients, Nanotechnology Applications in Food: Flavor, Stability, Nutrition and Safety, ELSEVIER,ISBN: 978-0-12-811942-6.
3. Y. K. Prajapati, M. Pathak and M.K. Khan, 2017, Performance analysis of uniform and expanding cross-section microchannels for single phase and flow boiling heat transfer, Fluid Mechanics and Fluid Power - Contemporary Research, Springer, ISBN: 978-81-322-2741-0.
4. A. M. Sharan, M. Pathak and M. Verma, 2020, An Analytical Investigation of Solar Water Heater Performance During Winter Period in Jharkhand Region, Advances in Mechanical Engineering, Springer, Print ISBN: 978-981-15-0123-4, Online ISBN 978-981-15-0124-1: https://doi.org/10.1007/978-981-15-0124-1_118.
5. A. Kumar and M. Pathak, 2023, Dynamics of droplet impact at a low surface temperature, Fluid Mechanics and Fluid Power (Vol. 2), Lecture Notes in Mechanical Engineering, Online ISBN, 978-981-19-6970-6, https://doi.org/10.1007/978-981-19-6970-6.
6. P. Kumar, and M. Pathak, 2023, Effect of Slip Wall on the Droplet Formation in a Microfluidic T-junction, Fluid Mechanics and Fluid Power (Vol. 2), Lecture Notes in Mechanical Engineering, Online ISBN, 978-981-19-6970-6, https://doi.org/10.1007/978-981-19-6970-6.
7. I. Ahmad, M. Pathak, and MK Khan, 2023, Electrowetting Induced Dynamics of Microdroplet Oscillation, Fluid Mechanics and Fluid Power (Vol. 2), Lecture Notes in Mechanical Engineering, Online ISBN, 978-981-19-6970-6, https://doi.org/10.1007/978-981-19-6970-6.
8. A. Ranjan, M. Pathak, and MK Khan, 2023, Pool Boiling Heat Transfer of Hydrophobic Surfaces with Different Dynamic Wetting Characteristics, Fluid Mechanics and Fluid Power (Vol. 2), Lecture Notes in Mechanical Engineering, Online ISBN, 978-981-19-6970-6, https://doi.org/10.1007/978-981-19-6970-6.
9. A. Raj, C. Sarkar, P. Kumar and M. Pathak, 2023, Numerical Analysis of Magnetorheological Grease Flow Around Heated Rotating Rollers, Fluid Mechanics and Fluid Power (Vol. 3), Lecture Notes in Mechanical Engineering, Online ISBN, 978-981-19-6270-7, https://doi.org/10.1007/978-981-19-6270-7.
10. A. Priy, I. Ahmad, M. Pathak, and M., Khan, M.K., 2024, Effects of Wettability on the Flow Boiling Heat Transfer Enhancement. Fluid Mechanics and Fluid Power, Volume 5. FMFP 2022. Lecture Notes in Mechanical Engineering. Springer, Online ISBN, 978-981-99-6074-3, https:// https://doi.org/10.1007/978-981-99-6074-3_70.
11. M. Hussain, M.K. Khan, and M. Pathak, 2024, Modelling of Phase Change Material Embedded Li-Ion Battery Pack Under Different Load Conditions Using Equivalent Circuit Model. In Fluid Mechanics and Fluid Power, Volume 1. FMFP 2022. Lecture Notes in Mechanical Engineering. Springer, Online ISBN, 978-981-99-7827-4, https://doi.org/10.1007/978-981-99-7827-4_30.
Journal Publications
81. A. Priy, I. Ahmad, M.K. Khan and M. Pathak, 2024, Bubble interaction and heat transfer characteristics of microchannel flow boiling with single and multiple cavities, ASME Journal of Thermal Sciences and Engineering Applications, (Accepted).
80. R.K. Gouda, A. Ranjan, M. Pathak, and M.K. Khan, 2024, Combined effect of structured surface and biosurfactant in pool boiling heat transfer enhancement, International Journal of Heat and Mass Transfer, Vol. 221, 125102.
79. A. Kumar, and M. Pathak, 2023, Conjugate heat transfer analysis of internally cooled superalloy turbine blades with grooved channels, Physics of Fluids, Vol. 3095112 (2023).
78. A. Kumar, and M. Pathak, 2023, Droplet impact on hydrophobic and superhydrophobic surfaces with the electrowetting technique, Chemical Engineering Science, Vol. 281, 119162.
77. I. Ahmad, A. Ranjan, M. Pathak, and M.K. Khan 2023, Electrowetting-assisted pool boiling heat transfer characteristics under low gravity conditions, International Journal of Thermal Sciences, Vol. 192,108440.
76. A. Ranjan, A. Priy, I. Ahmad, M. Pathak M.K. Khan, and A. Keshri 2023, Heat transfer characteristics of pool boiling with scalable plasma-sprayed aluminum coatings, Langmuir, Vol. 39(18), pp. 6337 to 6354.
75. R. Kumar, M.K. Khan and M. Pathak 2023,Efficient thermoelectric cooler for localized cooling in electronic devices, ASME Journal of Thermal Sciences and Engineering Applications, (Accepted).
74. M. Hussain, M.K. Khan and M. Pathak 2023,Thermal analysis of phase change material encapsulated Li-ion battery pack using multi-scale multi-dimensional framework, Journal of Energy Storage, Vol. 65, 107290.
73. P. Kumar and M. Pathak 2023, Droplet generation and breakup in a ribbed microfluidic T-junction for scalable emulsification process, Microsystem Technologies, (accepted), https://doi.org/10.1007/s00542-023-05428-7.
72. A. Ranjan, A. Priy, I. Ahmad, M. Pathak and M.K. Khan 2023,Pool boiling heat transfer characteristics of a stepped microchannel structured heating surface International Journal of Multiphase Flow, Vol. 160, 104351, pp. 1-16.
71. A. Kumar, I. Ahmad and M. Pathak 2023, Droplet impact on a hydrophobic surface integrated with electrowetting technique, Colloids and Surfaces A: Physicochemical and Engineering Aspect, Vol. 656(2023) 130423.
70. A. Raj, C. Sarkar, P. Kumar and M. Pathak 2023, Magnetorheological grease flow in a double restriction seal configuration, ASME Journal of Tribology, Vol. 145(5), 054401.
69. P. Kumar and M. Pathak 2023, Effect of velocity slip on the flow and heat transfer characteristics during droplet formation in a microfluidic T-junction, Journal of Thermal Analysis and Calorimetry, Vol. 148, pp.2737-2747.
68. A. Priy, S. Raj, M. Pathak and M. K. Khan 2022, A hydrophobic porous substrate-based vapor venting technique for mitigating flow boiling instabilities in microchannel heat sink, Applied Thermal Engineering, Vol. 216, 119138, pp. 1-13.
67. P. Kumar and M. Pathak 2022, Dynamic wetting characteristics during droplet formation in a microfluidic T-junction, International Journal of Multiphase Flow, Vol. 156, 104203, pp. 1-12.
66. A. Raj, C. Sarkar, P. Kumar and M. Pathak 2022, Investigation of magnetorheological grease flow under the influence of a magnetic field, Journal of Molecular liquids,Vol.361, pp. 1-11.
65. R. Kumar, R. Bhatt, A. Tewari, A.K. Debnath, P. Bhatt, N. Mani, P. Jha, P. Patro , S. Bhattacharya, M. Pathak, M.K. Khan, A. Singh, and K.P. Muthe, 2022, Synergistic Effect of Zn Doping on Thermoelectric Properties to Realize High Figure-of-merit and Conversion Efficiency in Bi2-xZnxTe3 Based Thermoelectric Generator, Journal of Materials Chemistry C, Vol. 10, pp. 7970 - 7979, DOI:10.1039/d1tc06118f.
64. I. Ahmad, M. Pathak and M.K. Khan 2022,Transient evolution of electrowetting induced oscillating droplets on hydrophobic substrates, Journal of Molecular liquids,Vol. 353, 118704, pp.1-15.
63. I. Ahmad, M. Pathak and M.K. Khan 2022, A Wettability-mediated microdroplet under electrowetting effect for hotspot cooling, IEEE Transactions on Components, Packaging and Manufacturing Technology,Vol. 12, pp. 288-296.
62. P. Kumar and M. Pathak 2022, Droplet formation under wall slip in a microfluidic T-junction, Journal of Molecular liquids, vol. 345, 117808, pp. 1-13.
61. A. Ranjan, I. Ahmad, R.K. Gouda, M. Pathak and M.K. Khan, 2022, Enhancement of Critical Heat Flux (CHF) in Pool Boiling with Anodized Copper Surfaces, International Journal of Thermal Sciences,vol. 172, 107338, pp. 1-13.
60. V. Kumar, M. Pathak and M.K. Khan 2022, Heat transfer characteristics of a closed-loop two-phase thermosyphon system with a structured heating surface ASME Journal of Thermal Science and Engineering Applications, vol.14(1): 011013.
59. A. Raj, C. Sarkar, M. Pathak 2022,Thermal and multiphase flow simulations of polytetrafluoroethylene-based grease flow in restricted geometry, Proc. I. Mech. E Part J: Journal of Enginering Tribology, vol.236, pp. 80-89.
58. A. Raj, C. Sarkar and M. Pathak 2021, Magnetorheological characterisation of PTFE-based grease with MoS2 additive at different temperatures, IEEE Transactions on Magnetics,vol.57(7),9405653.
57. S. Das, N. Verma, M. Pathak and S. Bhattacharyya 2021, Axially structured porous layer for heat transfer enhancement in a solar receiver tube, Journal of Thermal Science, vol.30(5), pp.1643-1657.
56. I. Ahmad, M. Pathak and M.K. Khan 2021, Electrowetting induced microdroplet oscillation over interdigitated electrodes for hotspot cooling applications, Experimental Thermal and Fluid Science, vol. 125, 110372, pp. 1-10.
55. S. Bhattacharyya, M. Pathak, M. Sharifpur, S. Chamoli, and D.R.E. Ewim, 2021, Heat transfer and exergy analysis of solar air heater tube with helical corrugation and perforated circular disc inserts, Journal of Thermal Analysis and Calorimetry, vol. 145(3), pp. 1019-1034.
54. R.K. Gouda, M. Pathak and M.K. Khan 2020, Pool boiling heat transfer characteristics of a biosurfactant particle deposited heating surface, International Journal of Heat and Mass Transfer, vol.163, 120455, pp.1-13.
53. S. Raj, M. Pathak and M.K. Khan, 2020 Flow boiling characteristics in different configurations of stepped microchannels, Experimental Thermal and Fluid Science, vol. 119, 110217, pp.1-17.
52. M. A. Hassan, M. Pathak, M. K. Khan and N.H. Khan 2020, Natural convection of viscoplastic fluids in an enclosure with partially heated bottom wall, International Journal of Thermal Sciences,vol. 158, 106527, pp.1-13.
51. P. Kumar, M. Pathak 2020, Pressure transient during wettability mediated droplet formation in a microfluidic T-junction, Industrial & Engineering Chemistry Research,vol. 59, pp.11839-11850.
50. R.K. Gouda, M. Pathak and M.K. Khan 2020, A biosurfactant as prospective additive for pool boiling heat transfer enhancement, International Journal of Heat and Mass Transfer, vol. 150, 119292, pp.1-13.
49. S. Raj, M. Pathak and M.K. Khan, 2020, An improved mechanistic model for predicting bubble characteristic size in subcooled flow boiling, International Journal of Heat and Mass Transfer, vol. 149, 119118, pp.1-11.
48. S. Bhattacharyya, A. C. Benim, M. Pathak, S. Chamoli, and A. Gupta, 2020, Thermohydraulic characteristics of inline and staggered angular cut baffle inserts in the turbulent flow regime, Journal of Thermal Analysis and Calorimetry, vol. 140(3), pp.1519-1536.
47. S. Raj, A. Shukla, M. Pathak and M.K. Khan, 2019, A Novel Stepped Microchannel for Performance Enhancement in Flow Boiling, International Journal of Heat and Mass Transfer, vol. 144, 118611, pp.1-14.
46. A. Ranjan, A. Islam, M. Pathak, M.K. Khan and A. Keshri, 2019, Plasma Sprayed Copper Coatings for Improved Surface and Mechanical Properties, Vacuum vol.168,108834, pp. 1-12.
45. S. Raj, M. Pathak and M.K. Khan, 2019, Effects of flow loop components in suppressing flow boiling instabilities in microchannel heat sinks, International Journal of Heat and Mass Transfer, vol.141, pp. 1238-1251.
44. B. Pandey, D.S. Reddy, M.K. Khan and M. Pathak, 2019,Standard Rating Charts for Low GWP Refrigerants Flowing Through Adiabatic Helical Capillary Tube, ASME Journal of Thermal Science and Engineering Applications vol. 11(5), pp. 051015-051015-9.
43. R. K. Gouda, M. Pathak and M.K. Khan 2018, Pool boiling heat transfer enhancement with segmented finned microchannels structured surface, International Journal of Heat and Mass Transfer, vol.127, pp.39-50.
42. T. Sood, S.Roy and M. Pathak 2018, Effect of pulse rate variation on blood flow through axisymmetric and asymmetric stenotic arteries, Mathematical Biosciences, vol.298, pp.1-18.
41. S. Suman, M.K. Khan, M. Pathak and R.N. Singh 2018, Effects of hydrogen on thermal creep behaviour of Zircaloy fuel cladding, Journal of Nuclear Materials, vol.498, pp.20-32.
40. S. Suman, M.K. Khan, M. Pathak and R.N. Singh 2018,Effects of delta-hydride precipitated at a crack tip on crack instability in Zircaloy-4, International Journal of Energy Research, vol.42, pp. 284-292.
39. S. Suman, M.K. Khan, M. Pathak and R.N. Singh 2017,Investigation of elevated-temperature mechanical properties of delta-hydride precipitate in zircaloy-4 fuel cladding tubes using nanoindentation, Journal of Alloys and Compounds, vol.726, pp. 107-113.
38. S. Suman, M.K. Khan, M. Pathak and R.N. Singh 2017, 3D simulation of hydride-assisted crack propagation in zircaloy-4 using XFEM, International Journal of Hydrogen Energy, vol. 42, pp.18668-18673
37. Y. K. Prajapati, M. Pathak and M.K. Khan 2017, Numerical investigation of subcooled flow boiling in segmented finned microchannels, International Communication in Heat and Mass Transfer, vol.86, pp. 215-221. (appeared in the list of most downloaded articles, 2017-18)..
36. D. S. Thakur, M.K. Khan and M. Pathak 2017, Solar air heater with hyperbolic ribs: 3D simulation with experimental validation, Renewable Energy, vol.113, pp.357-368.
35. S. Raj, M. Pathak and M.K. Khan 2017, An analytical model for predicting growth rate and departure diameter of a bubble in subcooled flow boiling,International Journal of Heat and Mass Transfer, vol.109, pp. 470-481.
34. D. S. Thakur, M.K. Khan and M. Pathak 2017, Performance evaluation of solar air heater with novel hyperbolic rib geometry, Renewable Energy, vol.105, pp.786-797.
33. S. Suman, M.K. Khan, M. Pathak and R.N. Singh 2017, Effects of hydride on crack propagation in zircaloy-4, Proceedia Engineering, vol. 173, pp. 1185-1190.
32. Y. K. Prajapati, M. Pathak and M.K. Khan 2017, Bubble dynamics and flow boiling characteristics in three different microchannel configurations, International Journal of Thermal Sciences, vol.112, pp.371-382.
31. S. Suman, M.K. Khan, M. Pathak, R.N. Singh and J.K. Chakravartty 2016, Rupture behaviour of nuclear fuel cladding during loss-of-coolant accident, Nuclear Engineering and Design,vol.307, pp.319-327 (appeared in the list of most downloaded articles, 2016-17).
30. Y. K. Prajapati, M. Pathak and M.K. Khan 2016, Transient heat transfer characteristics of segmented finned microchannels, Experimental Thermal and Fluid Science,vol.79, pp.134-142. (appeared in the list of most downloaded articles, 2016-17).
29. Y. K. Prajapati, M. Pathak and M.K. Khan 2016, Clogging behavior of an elongated bubble in uniform and diverging microchannel, Proc. I. Mech. E Part C: Journal of Mechanical Engineering Science, vol. 230(11), pp. 1861-75.
28. Y. K. Prajapati, M. Pathak and M.K. Khan 2016, Transient analysis of microchannel heat sink during single phase and flow boiling conditions, Applied Mechanics and Materials, vol. 819, pp. 101-106.
27. M. A. Hassan, M. Pathak and M. K. Khan 2015, Rayleigh-Benard convection in Herschel-Bulkley fluid, Journal of Non-Newtonian Fluid Mechanics, vol. 226, pp. 32-45. (appeared in the list of most downloaded articles, 2015-16).
26. S. Suman, M.K. Khan and M. Pathak 2015, Performance enhancement of solar collectors- review, Renewable & Sustainable Energy Reviews, vol. 49, pp. 192-210.
25. S.Suman, M.K. Khan, M.Pathak, R.N. Singh, J.K. Chakravartty, 2015, Hydrogen in Zircaloy: Mechanism and its Impacts, International Journal of Hydrogen Energy, vol.40, pp.5976-5994.
24. M. A. Hassan, M. Pathak and M. K. Khan 2015, Thermo-rheological characterization of elasto-viscoplastic Carbopol gel, ASME Journal of Engineering Materials and Technology, vol. 137, pp.0310021.
23. Y. K. Prajapati, M. Pathak and M.K. Khan 2015, A comparative study of flow boiling heat transfer in three different configurations of microchannels, International Journal of Heat and Mass Transfer , Vol. 85, pp. 711-722.
22. Y. K. Prajapati, M. Pathak and M.K. Khan 2015, Computational fluid dynamics modeling of two-phase flow in an adiabatic capillary tube, ASME Journal of Thermal Science and Engineering Applications Vol. 7, pp. 011006-1-7.
21. Y. K. Prajapati, M.K. Khan and M. Pathak 2014, Two-phase VOF model for the refrigerant flow through adiabatic capillary tube, ASHRAE Transactions Vol. 120(1), pp. 60-67.
20. M.K. Khan, M. Pathak, S. Suman, A. K. Deo and R. Singh 2014, Burst investigation on Zircaloy-4 Clad tube in postulated LOCA conditions, Annals of Nuclear Engineering, Vol. 69, pp. 292-300.
19. M.K. Khan and M. Pathak 2014, Ballooning deformation of Zircaloy-4 fuel sheath, ASME Journal of Pressure Vessel Technology, Vol. 136, pp. 031204-1-12.
18. M. K. Khan, M. Pathak, A. K. Deo and R. Singh 2013, Burst criterion for zircaloy-4 fuel cladding in an inert environment, Nuclear Engineering and Design, Vol. 265, pp. 886-894.
17. M. A. Hassan, M. Pathak and M. K. Khan 2013, Natural Convection of Viscoplastic Fluids in a Square Enclosure, ASME Journal of Heat Transfer, Vol. 135, pp. 122501-1-12.
16. M. Pathak and M.K. Khan 2013, Inter-phase slip velocity and turbulence characteristics of micro-particles in an obstructed two-phase flow, Environmental Fluid Mechanic, Vol. 13, pp. 371-388.
15. A.M. Sharan and M. Pathak 2013, Global warming and its effect on flow in Ganga river, Asian Journal of Water, Environment and Pollution, Vol. 10(4), pp. 117-122.
14. M. Pathak, 2012, Numerical analysis of droplet dynamics under different temperature and cross-flow velocity conditions, ASME Journal of Fluids Engineering, Vol. 134, pp. 044501-1-6.
13. M. Pathak 'Reply by the author', 2011, Journal of Hydraulic Research, Vol. 49, No. 6, pp. 841.
12. M. Pathak, 2011, Numerical simulation of membrane emulsification: effect of flow properties in the transition from dripping to jetting Journal of Membrane Science, Vol. 382, pp. 166-176.
11. T. Alam, M.K.Khan, M. Pathak, K. Ravi, R. Singh and S.K. Gupta, 2011, A review on the clad failure studies Nuclear Engineering and Design, Vol. 241, No 9, pp. 3658-3677 (appeared in the list of most downloaded articles, 2012-13).
10. M. Pathak, 2011, Computational Investigations of Solid-liquid Particle Interaction in a Two-phase Flow Around a Ducted Obstruction, Journal of Hydraulic Research, Vol. 49, No. 1, pp. 96-104.(appeared in the list of most read articles).
9. I. Smagin, M. Pathak, O. M. Lavrenteva and A. Nir, 2011, Motion and shape of an axisymmetric viscoplastic drop slowly falling through viscous liquid, Rheologica Acta, Vol. 50, No. 4, pp. 361-374.
8. M. Pathak, N. Sahoo and A. Dewan, 2008, Experimental investigation of pressure gradient characteristics in a mass flow rate controlled pulsating pipe flow, Journal of Institution of Engineers, Vol. 89, pp. 11-15.
7. M. Pathak, A. Dewan and A. K. Dass, 2008, Distribution of temperature as a passive scalar in the flow field of a heated turbulent jet in crossflow, Numerical Heat Transfer, Part A, Vol. 54, pp 67-92.
6. M. Pathak, A.K. Dass, and A. Dewan, 2008, An investigation of turbulent rectangular jet discharged into a narrow channel weak crossflow, Journal of Hydrodynamics, Vol. 21, No 2, pp 154-163.
5. M. Pathak, A. Dewan and A. K. Dass, 2007, Effect of Streamline Curvature on Flow Field of a Turbulent Plane Jet in Cross-flow, Mechanics Research, Communication, Vol. 34, No. 3, pp. 241- 248.
4. M. Pathak, A. Dewan and A. K. Dass, 2006, Computational prediction of a slightly heated turbulent rectangular jet discharged in to a narrow channel cross-flow using two different turbulence models, International Journal of Heat and Mass Transfer, Vol. 21-22, No.49, pp. 39214-3928.
3. A. Dewan, M. Pathak and A. K. Dass, 2006, A Survey of selected literature on important flow properties and computational fluid dynamics treatments of incompressible turbulent plane and round jets in quiescent ambient, Indian Journal of Engineering and Materials Sciences, Vol. 13, No. 3, pp. 180-194.
2. M. Pathak, A. Dewan and A. K. Dass, 2005 An assessment of streamline curvature rffects on the mixing region of a turbulent plane jet in crossflow, Applied Mathematical Modeling, Vol. 29, No 8, pp. 711-725.(appeared in the list of most downloaded articles, 2014-15).
1. M. Pathak, P. Suresh Kumar and U. K. Saha, 2005, Prediction of off-design performance characteristics of a gas turbine cycle using matching technique, International Journal of Turbo and Jet Engine, Vol. 22, No 2, pp. 103-119.
Conference Publications
P. Kumar and M. Pathak, 2019, Effect of High Viscosity Ratio on Pressure Profile Evolution in Microfluidic T-Junction, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019),IIT Roorkee, 28-30 December 2019
R. Gouda, M. Pathak and M.K. Khan, 2019, Combined Effects of Structured Surfaces and Surfactant in Pool Boiling Heat Transfer Enhancement, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019),IIT Roorkee, 28-30 December 2019
S. Bhattacharyya, R. Modi, K. Dey, M. A. Rahman and M. Pathak, 2019, Heat transfer and flow characteristics of circular channels with mixed ribs configuration, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019),IIT Roorkee, 28-30 December 2019
S. Das, N. Verma, M. Pathak, and S. Bhattacharyya, 2019, Heat Transfer Enhancement in Solar Receiver Tube Using Porous Media, 4th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2019(HEFAT2019), Wicklow, Ireland, 22-24, July 2019
V. Kumar, M. Pathak and M.K. Khan, 2018, Performance Enhancement of a Closed Loop Two Phase Thermosyphon at High Heat Flux, 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP-2018), IIT Bombay, 10-12 December 2018
A. Ranjan, M. Pathak and M.K. Khan, 2018, Pool Boiling Heat Transfer Characteristics of a Plasma Sprayed Coated Surface, 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP-2018), IIT Bombay, 10-12 December 2018
R. Kumar, M. Pathak and M.K. Khan, 2018, Transient Simulation of a Three Dimensional Single Pair of Thermoelectric Cooler, 7th International and 45th National Conference on Fluid Mechanicsand Fluid Power (FMFP-2018), IIT Bombay, 10-12 December 2018
P. Kumar and M. Pathak, 2018, Effect of High Viscosity and Wall Contact Angle on Droplet Formation in a Microfluidic T-Junction, 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP-2018), IIT Bombay, 10-12 December 2018
R. Gouda, M. Pathak and M.K. Khan, 2018, Role of Structured Surface in Enhancement of Critical Heat Flux in Pool Boiling, National Conference on Critical Heat Flux and Multiphase Flow, IIT (BHU), Varanasi, December 22-23, 2018
A.M. Sharan, M. Pathak and M. Verma, 2018, An analytical investigation of solar water heater performance during winter period in Jharkhand region, International Conference on Recent Innovations and Developments in Mechanical Engineering, NIT Meghalaya, November 8 –10, 2018
S. Raj, M. Pathak and M.K. Khan 2018, Flow instability and CHF characteristics in segmented finned microchannels, 10th International Conference on Boiling and Condensation Heat Transfer (ICBCHT2018), Nagasaki, Japan, 12-15 March, 2018
R.K. Gauda, M. Pathak and M. K. Khan 2018, A novel impinged surface for pool boiling heat transfer enhancement, 10th International Conference on Boiling and Condensation Heat Transfer (ICBCHT-2018), Nagasaki, Japan, 12-15 March 2018
I. Ahmad, M. Pathak and M. K. Khan 2017, Numerical investigation of microfluidic transport based on electrowetting of dielectric , 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017),27-30 December 2017, BITS Pilani, Hyderabad
S. Raj, M. Pathak and M.K. Khan 2017, A comparative study of subcooled flow boiling in uniform and segmented finned microchannel, 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017),27-30 December 2017, BITS Pilani, Hyderabad
P. Kumar, Rajneesh and M. Pathak 2017, Experimental Investigation of Falling Film Heat Transfer in External Surfaces, 44th National Conference on Fluid Mechanics and Fluid Power, December 14-16, 2017, Amrita University, Kerela, india
R. K. Gouda, M. Pathak and M.K. Khan 2017. Experimental investigation of pool boiling heat transfer in smooth and enhanced surfaces, 44th National Conference on Fluid Mechanics and Fluid Power, December 14-16, 2017, Amrita University, Kerela, india
M. Pathak 2017, Transient heat transfer characteristics in microchannel heat sinks for electronic cooling in aerospace applications, National Frontiers of Engineering Symposium, (NatFOE11, 2017), IIT Bombay, 30 June-1 July, 2017
S. Suman, M.K. Khan, M. Pathak and R.N. Singh 2017, 3D simulation of hydride-assisted crack propagation in zircaloy-4 using XFEM, 5th International Conference on Energy Engineering and Environmental Engineering (ICEEEE-2017), Xiamen, China, 15-16 April 2017
S. Suman, M.K. Khan, M. Pathak and R.N. Singh 2016, Effects of Hydrogen on Thermal Creep Behaviour of Zircaloy, 3rd Indo-Austrian Symposium on 'Advances in Materials Engineering' (AME 2016), 19-20 December 2016
S. Raj, M. Pathak and M.K. Khan 2016, Prediction of Bubble Lift-off Diameter in Sub-Cooled Flow Boiling, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016
D.S. Thakur, M.K. Khan and M. Pathak 2016, 3D CFD Simulation of Solar Air Heater Artificially Roughened with Novel Hyperbolic Ribs, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016
I. Ahmad, M. Pathak and M. K. Khan 2016, Natural Convection in a Square Enclosure with Transpiration and Ventilation Port, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016
S. Gore, M. Pathak and M. K. Khan 2016, Heat transfer Enhancement of Phase Change Material (PCM) with Nanoparticle for Thermal Storage System, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016
A. Ranjan, R Gauda, M. Pathak and M. K. Khan 2016, A Review on Bubble Growth, Departure Diameter and Release Frequency in Pool Boiling, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016
Y. K. Prajapati, M. Pathak and M.K. Khan 2016, Flow Visualization Study of Reverse Flow Phenomenon in Microchannel, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016
S. Suman, M.K. Khan, M. Pathak and R.N. Singh 2016, Understanding Influence of Hydride Precipitated at a Crack Tip on Crack Propagation in Zircaloy-4 Fuel Cladding using XFEM, IISc Bangalore, Bengaluru, 11-15 December 2016
S. Suman, M.K. Khan, M. Pathak and R.N. Singh 2016, Effects of hydride on crack propagation in zircaloy-4, 11th International Symposium on Plasticity and Impact Mechanics (IMPLAST 2016) IIT Delhi, New Delhi, 11-14 December 2016
S. Suman, M.K.Khan, M. Pathak and R.N. Singh, Effects of Hydrogen on Thermal Creep of Zircaloy, 5th International Conference on Nuclear and Renewable Energy Resources, Hefei, Anhui, China, 18-21 September 2016
S. Suman, M.K.Khan, M. Pathak and R.N. Singh 2016, Numerical Simulation of Influence of Precipitated Hydride on Crack Propagation in Zircaloy Fuel Cladding, 5th International Conference on Nuclear and Renewable Energy Resources, Hefei, Anhui, China, 18-21 September 2016
D.S. Thakur, M.K. Khan and M. Pathak 2016,Parametric study of a solar air heater with different rib geometries, 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT-2016), Costa del Sol, Spain
S. Raj, M. Pathak and M.K. Khan 2016, Prediction of Bubble Departure Diameter in Subcooled Flow Boiling, 2nd International Conference on Thermal Energy and Environment, (INCOTEE 2016), India
I. Ahmad, M. Pathak and M. K. Khan 2016, Investigation of Natural Convection in a Differentially Heated Room with Ventilation and Transpiration Port, Global Conference on Renewable Energy (GCRE-2016), NIT Patna, India
D.S. Thakur, M.K. Khan and M. Pathak 2016, Parametric Investigation of Artificially Roughened Solar Air Heater with Parabolic Rib Geometry, Global Conference on Renewable Energy (GCRE-2016), NIT Patna, India
Y.K. Prajapati, M. Pathak and M.K. Khan, 2015, Investigation of Flow Boiling Heat Transfer in Segmented finned Microchannels, 23rd National and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC2015), ISRO Trivundram, India
M. A. Hassan, M. Pathak and M. K. Khan, 2015, Thermal instabilities in convection of viscoplastic fluids, 23rd National and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC2015), ISRO Trivundram, India
Y.K. Prajapati, M. Pathak and M.K. Khan, 2014, Transient Analysis of Microchannel Heat Sink during Single Phase and Flow Boiling Conditions, 7th International Meeting on Advances in Thermofluids, Kuala Lumpur, Malaysia, Novemebr 26-27.
Y.K. Prajapati, M. Pathak and M.K. Khan, 2014, Performance Analysis of Uniform and Expanding Cross-section Microchannels in Single Phase and Flow boiling Heat Transfer, 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, IIT Kanpur, Kanpur, India, December, 12-14
Y.K. Prajapati, M. Pathak and M.K. Khan 2014, A Comparative study of subcooled flow boiling in uniform, diverging cross-section and segmented finned microchannels, ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM) Chicago, Illinois, USA, August 3-7.
Y. K. Prajapati, M.K. Khan and M. Pathak 2014, Two-phase VOF model for the refrigerant flow through adiabatic capillary tube, ASHRAE Winter Conference, New York, NY, January 18-22.
Y. K. Prajapati, M. Pathak, and M. K. Khan, 2014, Experimental and numerical analysis of microchannel heat sink, Proceedings of International mechanical engineering congress, NIT Tiruchirappalli, India, June 12-15.
Y. K. Prajapati, M. Pathak and M.K. Khan 2013, Effects of surface wettability and cross section area on the evolution of an elongated bubble in a microchannel, 40th National Conference on Fluid Mechanics and Fluid Power, NIT Hamirpur, India
Y. K. Prajapati, M. Pathak and M.K. Khan 2013, Numerical investigation of refrigerant flow through adiabatic capillary tube, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, IIT Kharagpur, India
M. A. Hassan, M. Pathak and M. K. Khan, 2013, Convection heat transfer of yield stress fluids in an enclosure with eccentrically heated bottom wall, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, IIT Kharagpur, India
M. A. Hassan, M. Pathak and M. K. Khan, 2013, Natural convection of viscoplastic fluids in an enclosure with localized heating and symmetrical cooling, ASME 2013 Summer Heat Transfer Conference (HT2013), Minneapolis, USA
M. A. Hassan, M. Pathak and M. K. Khan, 2013, Natural convection of yield stress fluids in a square enclosure with differentially heated side walls, 2nd National Conference on Advances in Heat Transfer and Fluid Dynamics, Aligarh, India
M. A. Hassan, M. Pathak and M. K. Khan, 2012, Natural convection of viscoplastic fluids in a square enclosure with localized heating from below and symmetrical cooling from sides, SERC School & Sixth National Symposium on Rheology of Complex Fluids, Guwahati, India
A.M. Sharan and M. Pathak, 2012, Design of spatially directed light emitting diode (led) illumination source, Newfoundland Electrical and Computer Engineering Conference, (NECEC 2012), Newfoundland, Canada.
M. Pathak, 2011, Computational investigation of microdroplet formation in a crossflow membrane emulisification process, ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM2011) Edmonton, Canada.
M. Raghavendra and M. Pathak, 2011, Calculation of conjugate heat transfer in a surface injected rotating cylinder in crossflow: a simulation of film cooling in the leading edge region of a turbine blade, 20th National and 9th International ISHMT-ASME Heat and Mass Transfer Conference, Madras, India.
B.K. Chaitanya Reddy, K. S. Veer Reddy and M. Pathak, 2011, Computation of energy loss in a T-junction flow with large area ratio, 20th National and 9th International ISHMT-ASME Heat and Mass Transfer Conference, Madras, India.
M. Pathak, 2010, Computational Investigation of Particulate Slurry Flow around a Square Shaped Obstruction in a Rectangular Duct, 20th National and 9th ISHMT-ASME Heat and Mass Transfer Conference, Mumbai, India.
M. Pathak, 2010, Simulation of a Micro-fluidic Membrane Emulsification Process, SMART ANSYS India 2010 Conference, Bangalore, India.
Sampath Kumar Chinige, N. Sahoo, A. Dewan and M. Pathak, 2008, An Experimental Study of Pulsating Flow in a Pipe, Proc. 19th National and 8th ISHMT-ASME Heat and Mass Transfer Conference, Hyderabad, India.
A. Dewan, M. Pathak and A.K. Dass, 2006, Heated Turbulent Rectangular Jet Discharged Into a Narrow Channel Cross flow, Proc. International Conference on Recent Advances in Heat Transfer, Coimbatore, India, pp. 73-83.
M. Pathak, A. Dewan and A.K. Dass, 2006, Computational Fluid Dynamics of Flow Field of a Heated Turbulent Plane Jet in Cross-flow using Reynolds-stress Transport Model, Proc. 18th National and 7th ISHMT-ASME Heat and Mass Transfer Conference, Guwahati, India (Paper No. HMT-2006-C125).
A. Dewan, M. Pathak, A.K. Dass and P. Sardar, 2006, Prediction of Turbulent Round Jet in a Co-flowing Ambient using the k-e Model of Turbulence, Proc. 18th National and 7th ISHMTASME Heat and Mass Transfer Conference, Guwahati, India (Paper No. HMT-2006-C120).
M. Pathak, A. Dewan and A.K. Dass, 2005, A Computational Study of Three-Dimensional Turbulent Flow Due to Interaction of a Slot Jet and Cross-flow Using Reynolds-Stress Transport Model, Proc. 8th Annual Computational Fluid Dynamics Symposium of Aeronautical Society of India, Bangalore.
M. Pathak, A. Dewan and A. K. Dass, 2004, A Review of Effect of Streamline Curvature on Turbulence and a Case Study of Turbulent Plane Jet in Crossflow, Proc. 7th annual CFD Symposium, of Aeronautical Society of India, Bangalore.
M. Pathak and P. Mahanta, 2003, Exact Solutions to the Radiative Heat Transfer Problems in Cylindrical Enclosure involving Participating medium, Proc. 6th ASME-JSME Thermal Engineering Joint Conference, Hawaii, USA.
M. Pathak, P. Kalita and K. Kalita, 2002, An advanced Generic Type Dual Fuel Conversion System for Diesel Engine Vehicle, Proc., All India Seminar on Application of Compressed Natural Gas (CNG) as an Automotive Fuel, Guwahati.
S. C. Mishra and M. Pathak, 2002, Collapsing Coefficients Used in the Collapsed Dimension Method for the Study of Radiative Heat Transfer Problems, Proc. International Symposium on Recent Trends in Heat and Mass Transfer, Indian Institute of Technology Guwahati, India.