Indian Institute of Technology Patna

Current PhD Students

  1. Amit Kumar Jha(2023-): AI based tool condition monitoring
  2. Vishnu Kumar Singh(2021-): Micromachining of solar cell
  3. Kapil Kumar Gupta(2021-): Micromachining of ceramics
  4. Surya Prakash Singh(2021-): Machining of implants
  5. Krishna veer Singh Gurjar (2021-): Wave Energy harvesting
  6. Partha Sarathi Mallick (2020-): Cryogenic micromachining
  7. Akshay Saxena (2019-): Soft and stretchable sensor

Completed PhD Students

  1. Anup Sankar Sadangi (2016-2022): Harvesting vibration energy using soft polymers (thesis submitted)
  2. Priyabrata Sahoo (2016-2021): Modeling of micromilling process
  3. Ajeet Kumar (2015-2021 ): Dielectric elastomer generators
  4. Ashwani Pratap (2015- 2020): Microgrinding of hard and britle materials
  5. Dilshad Ahmad (2014-2020): Dielectric elastomer characterization
  6. Tej Pratap (2013-2019): Surface modification using Micromilling
  7. Ravi Shankar Anand (2012-2016): Modeling of micro-drilling process considering size effects.
  8. Raj Kumar Sahu (2010-2014): Characterization of mechanical and electrical properties of dielectric elastomer for actuator application.

Current MTech Students

  1. Shankar Kumar (2022-23): Broken rail monitoring using drone
  2. Mukul Kumar Ojha (2022-23): Robotic arms for sensor testing
  3. Varad Paraswar (2022-23): Collaborive drone

Completed MTech Students

  1. Arushi Kumar Prakash (2021-22): Biaxial testing of fabrics
  2. Ritesh Kumar Singh (2021-22): Prosthetic heart pump
  3. Pramod Kumar Modi (2020-21): Hybrid electric vehicle
  4. Aishwarya Archit Pandey (2020-21): Micro cyber physical Machine Tool Monitoring and Maintenance
  5. Pawan Kumar Lulla (2019-20): Power flow control and power split design in HEV
  6. Vivek Kumar Singh (2018-19): Cryogenic machining of soft materials
  7. Rajeev Gautam (2018-19): Underwater miniature robot
  8. Rahul Ranjan Bharti (2018-19): VFD based automated biaxial testing machine
  9. Deepak Kumar Mehta (2018-19): Oil filtration and blending machine
  10. Amit Kumar (2017-18): Development of soft and stretchable actuators
  11. Sumeet Shekhar (2017-18): Development of artificial skin
  12. Anoop Kumar Sinha (2016-17): Development of biaxial testing machine
  13. Sujit Kumar Sahu (2016-17): Human motion based energy harvester
  14. Abhishek Saini (2015-16): Dielectric elastomer micropump
  15. Avinash Kumar (2015-16): Dielectric elastomer generators
  16. Llewellyn D'sa (2015-16): Upper limp prostheses with tactile feedback
  17. Jitesh Ranjan (2014-15): Tool condition monitoring in mechanical microdrilling
  18. Deonath Kumar (2014-15): Myoelectric upper limb prostheses
  19. Nitin Kumar Singh (2013-14): Energy harvesting using dielectric elastomer
  20. Amit K. Jha (2013-14): Multi sensor based intelligent tool condition monitoring in mechanical microdrilling

Current BTech Projects

  1. BATTU SAMHITH and MAKINENI AJAY KESAVA CHOWDARY (2022-23): workpiece rotating and tilting fixture
  2. RAYAVARAPU SAI VINEETHA and THUMMA SWEEJA (2022-23): Simulation of DEG based wave energy harvester

Completed BTech Projects

  1. Sahebjeet Singh Gujral (2021-22): Assistive robots for upper limb rehabilitation
  2. Pranav Bajaj and Arohan Panda(2021-22): Soft Robotic Gripper
  3. Deep Thakkar (2015-16): Quadcopter
  4. A. R. Jithin and V.J.G. Bharadwaj (2015-16): Energy harvesting using dielectric elastomers
  5. Varun Gokhale (2016-17): Dielectric elastomer sensors
  6. Akash Gajbhiye and Vikalp Sinha(2016-17): Theo Jansen Mechanism
  7. Deep Thakkar (2015-16): Quadcopter
  8. A. R. Jithin and V.J.G. Bharadwaj (2015-16): Energy harvesting using dielectric elastomers
  9. Ankit Kumar and Bijendra Meena (2014-15): Electromechanical characterization of dielectric elastomer based diaphragm actuator.
  10. Chandapure deepak jaywantrao and Shinde harshavardhan kantilal (2014-15): Designing and control of multi-copter with radio controls.
  11. Ranjit Singh and Suranjit Sarkar (2013-14): Microdrilling of fuel injection nozzle.
  12. Sri Harsha and S. Chakradhar Varma (2013-14):,Design and fabrication of dielectric elastomer actuators for robotic applications.
  13. Ashutosh Kumar and Anubhav Mathodia (2012-13): Experimental and numerical analysis of single phase flow microchannel heat sink (received Institute Proficiency Prize for this project).
  14. Prajjwal Prem Jamdagni (2011-12): Design and development of image guided mobile robot for pick and place of objects in various locations.
  15. Joji Augustine (2011-12): Design and fabrication of an industrial robot for welding applications.
  16. K R R Rajendran (2011-12): Investigation on the machining of micro-channels for micro-fluidic devices.


Last update: March 2023