Ph.D Students
- Ph.D 2021
- Ph.D 2020
- Ph.D 2019
- Ph.D 2018
- Ph.D 2017
- Ph.D 2016
- Ph.D 2015
- Ph.D 2014
- Ph.D 2013
- Ph.D 2012
- Ph.D 2011
- Ph.D 2010
- Ph.D 2009
Name | Area of Research | Supervisor | |
---|---|---|---|
Abhash Shukla |
abhash_2121me01 | Development of an all season optimal atmospheric water harvesting system | Dr. Rishi Raj |
Ajmit Kumar |
ajmit_2121me22 | Investigation of Gas Turbine Blade and Turbulence Modelling | Dr. Manabendra Pathak |
Akhilesh Kumar Tiwari |
akhilesh_2121me02 | Micromachining | Dr. Sudhanshu Sekhar Panda |
Ankur Agrawal |
ankur_2121me20 | Thermal Instability | Dr. Deepu Prabhakaran |
Danishtah Quamar |
danishtah_2121me30 | Design and development of MR Brake | Dr. Chiranjit Sarkar |
Kapil Kumar Gupta |
kapil_2121me07 | Micro grinding of alumina | Dr. Karali Patra |
Krishna Veer Singh Gurjar |
krishna_2121me08 | Smart Materials | Dr. Karali Patra |
Mazhar H |
mazhar_2121me25 | Thermal management for electric vehicles (tentative) | Dr. Mohd. Kaleem Khan and Dr. Manabendra Pathak |
Md Shadab Hasan |
shadab_2121me09 | Aerodynamic (Not Fixed) | Dr. Deepu P |
Mohit Sharma |
mohit_2121me10 | Incremental Sheet Metal Forming | Dr. Anirban Bhattacharya and Dr. Surajit Kumar Paul |
Rajnish Mishra |
2121me11 | Additive manufacturing of high strength metal alloys | Dr. Murshid Imam |
Rakesh Kumar Singh |
rakesh_2121me12 | Magneto-rheology based braking system | Dr. Chiranjit Sarkar |
Rashi Aditi Ranjan |
rashi_2121me13 | Continuum Mechanics | Dr. Somnath Sarangi |
Saurabh Chauhan |
saurabh_2121me16 | Study of MR fluid behavior using Discrete Element Method (DEM) | Dr. Chiranjit Sarkar |
Saurabh Kumar |
saurabh_2121me17 | Non-destructive assessment of welded joints using magnetic coercive force and correlation with mechanical properties |
Dr.Anirban Mahato and Dr.Anirban Bhattacharya |
Surya Prakash Singh |
surya_2121me18 | Micro texturing on bio-implants | Dr. Karali Patra |
Vishnu Kumar Singh |
vishnu_2121me28 | Analytical modeling of micro-milling process | Dr. Karali Patra |
Vivek Banjeet |
vivek_2121me29 | Rotor Dynamics | Dr. Mayank Tiwari |
Yuvaraj Deepak Kamble |
yuvaraj_2121me19 | Cell micro-assembly and manipulation using magnetic micro-robotics |
Dr. Atul Thakur (Supervisor) & Dr. Abhishek Raj (Joint Supervisor) |
Ajmit Kumar |
ajmit_2121me22 | Multi-phase flow in Micro-channels and Turbulence Modelling | Dr. Manabendra Pathak |
Ankur Sharma |
ankur_2121me23 | Solar Thermal Area | Dr. Mohd. Kaleem Khan |
Avinash Upadhyay |
avinash_2121me24 | Development of an ionic liquid based ultra-high heat dissipation module for energy efficient boiling systems |
Dr. Rishi Raj |
Tonmoy Sharma |
tonmoy_2121me27 | Permanent Dropwise Condensation via Amphilic Additives in Vapour Phase | Dr. Rishi Raj and Dr. Snehasis Daschakraborty |
Mahesh Bharati |
mahesh_2121me31 | Fatigue and fracture | Dr. Akhilendra Singh |
Atul Soni |
atul_2121me32 | Microfluidics Flow of non-Newtonian fluid | Dr. Abhishek Raj & Dr. Mohd. Kaleem Khan |
Name | Area of Research | Supervisor | |
---|---|---|---|
Partha Sarathi Mallick |
parth_2021me02 | Cryogenic machining | Dr. Karali Patra |
Anang Katyayan |
anang_2021me05 | Micro-machining | Dr. Probir Saha |
Bittu Kumar Singh |
bittu_2021me07 | Design of hybrid magnetorheometer for characterization of MR fluid | Dr. chiranjit sarkar |
Harsh Kumar |
harsh_2021me08 | Tribology | Dr. Mayank Tiwari |
Pritam Ojha |
pritam_2021me12 | Motion Planning Algorithms, Sampling Based Algorithms, Robotics, Artificial Intelligence |
Dr. Atul Thakur |
Satyendra R. Nishad |
satyendra_2021me13 | Bioinspired Robotics:- Lizard inspired wall climbing robots | Dr. Atul Thakur |
Saurabh Sagar |
saurabh_2021me14 | Structural mechanics & Materials | Dr. Mohd Kaleem Khan |
Syed Ahsan Haider |
syed_2021me17 | Microfluidics | Dr. Abhishek Raj |
Vivek Kumar |
vivek_2021me18 | Fluid structure interaction | Dr. Deepu P & Dr. Ashwani Assam |
Vivek Kumar |
vivek_2021me19 | Fatigue & Fracture | Dr. Akhilendra Singh |
Anoop Kumar Shukla |
anoop_2021me20 | Heat Transfer | Dr. Subrata Kumar |
Name | Area of Research | Supervisor | |
---|---|---|---|
Anuranjan Kumar (1921ME07) |
anuranjan_1921me07 | Improvement in fatigue and ductile fracture behaviour of steel and aluminium alloy by application of pulsed electric current. |
Dr. Surajit Kumar Paul |
Sunil Mehra (1921ME01) |
sunil_1921me01 | Energy-Food Nexus: Thermochemical Conversion of Waste Biomass and Agro-residue into applications such as Space Heating, Off-the-Grid Refrigeration and Climate Control Unit | Dr. Rishi Rajand Dr. Ajay D Thakur |
Subrat Kumar Behera (1921ME04) |
subrat_1921me04 | Continuum mechanics | Dr. Somnath Sarangi |
Aashna Raj (1921ME02) |
Aashna_1921me02 | Experiments and Modelling of Lubricating Grease flow |
Dr Chiranjit Sarkar (Guide), Dr. Manabendra Pathak (Co-Guide) |
Amit Vikram Rex (1921ME03) |
amit_1921me03 | Fatigue And Fracture of Metals | Dr. Akhilendra Singh And Dr. Surajit Kumar Paul |
Amrendra Chandan (1921ME08) |
amrendra_1921me08 | Design of Asperity for Textured Metal Surfaces to Improve Tribological Characteristic in Sliding : An In Situ Imaging Approach (High Speed Imaging). |
Dr. Anirban Mahato |
Abhishek Bihari (1921ME05) |
abhishek_1921me05 | Metal Cutting, High Speed Imaging , In Situ Analysis of Large-Scale Deformation. |
Dr. Anirban Mahato |
Dewanand Pandit |
dewanand_1921me06 | Dr. Murshid Imam | |
Ajit Kumar (July 2019) (1921ME04) |
ajit_1921me09 | Pool Boiling | Dr. Manabendra Pathak |
Akshay Saxena (July 2019) |
akshay_1921me10 | Artificial skin for robotics | Dr. Karali Patra |
Mukesh Kumar Singh (July 2019) |
mukesh_1921me13 | Municipal Waste sorting using hyperspectral imaging |
Dr. Atul Thakur |
Prabhakar Kumar Singh (July 2019) |
Prabhakar_1921me14 | Additive Manufacturing (AFS) | Dr. Probir Saha |
Kishor Kumar Jha (July 2019) |
kishor_1921me19 | Additive manufacturing of soft alloy by FSP |
Dr. Murshid Imam |
Rahul Sinha (July 2019) |
rahul_1921me15 | Energy | Dr. Rishi Raj |
Sanjeev Kumar (July 2019) |
Sanjeev_1921me16 | Calculation of gear mesh stiffness | Dr. Somnath Sarangi |
Uttam Kumar |
Uttam_1921me18 | Composite materials | Dr. Sudhanshu Sekhar Panda |
Name | Area of Research | Supervisor(s) | |
---|---|---|---|
Akash Priy |
akash_1821me02 | Dr. Manabendra Pathak Dr. Mohd. Kaleem Khan |
|
Kamlesh |
kamlesh_1821me03 | Bio-fluid Mechanics and Heat Transfer |
Dr. Deepu P |
Madhav Raturi |
madhav_1821me04 | Friction stir welding of dissimilar aluminium alloys |
Dr. Anirban Bhattacharya |
Mandeep |
mandeep_1821me05 | Microfluidics | Dr. Subrata Kumar |
Puja Ghosal |
puja_1821me06 | Effect of forming in the fatigue performance of automotive dual phase steel | Dr. Surajit Kumar Paul |
Rahul Kesharwani |
rahul_1821me07 | Friction Stir Welding | Dr. Chiranjit Sarkar Dr. Murshid Imam |
Sweta saroj |
Sweta_1821me08 | Friction stir welding of soft alloy | Dr. Murshid Imam |
Harish Suthar (1821me10) |
1821me10 | Local and fatigue behavior of friction stir welding joint. |
Dr. Anirban Bhattacharya & Dr. Surajit Kumar Paul |
Mayank Verma (1821ME11) |
1821me11 | Micro Friction Stir Welding of Dissimilar Alloys |
Dr. Probir Saha |
Neelesh K. Sharma (1821ME12) |
1821me12 | Human factor engineering, product design and biomechanics |
Dr. Mayank Tiwari and Dr. Atul Thakur |
Rathin Maity (1821ME15) |
1821me15 | Fatigue & Fracture | Dr. Surajit Kumar Paul and Dr. Akhilendra Singh |
Sudhanshu Kumar(1821me16) |
1821me16 | Rolling Contact Fatigue in Ball Bearing |
Dr Mayank Tiwari/ Dr Surajit Kumar Paul |
Tanmay (1821ME17) |
1821me17 | Dissimilar metal joining | Dr. Sudhanshu Sekhar Panda |
Vikash Kumar (1821ME18) |
1821me18 | Condition Monitoring and Fault Diagnosis of the Gearbox |
Dr. Somnath Sarangi |
Chandra Shekhar Maurya (1821ME19) |
1821me19 | Characterization of Rheological Properties of MR Fluids |
Dr. Chiranjit Sarkar Dr. Sandip Khan |
Aman Kumar Srivastava (1821ME20) |
1821me20 | Design of a Novel Bearing Support for Aero Engines, Nonlinear Dynamical Analysis of Rotors |
Dr. Mayank Tiwari Dr. Akhilendra Singh |
Name | Area of Research | Supervisor(s) | |
---|---|---|---|
manish.pme17 |
manish.pme17 | Studies on Magnetorheological Clutch | Dr. Chiranjit Sarkar |
Dharmveer Agarwal |
dharmveer.pme17 | Magnetic Micromanipulation | Dr. Atul Thakur |
Est Dev Patel |
dev.pme17 | Heat Pipe for Electronics Cooling | Dr. Subrata Kumar |
Ashutosh Rajput |
ashutosh.pme17 | Deformation and Damage Analysis of FCC and BCC Nanocrystalline Metals |
Dr. Surajit Kumar Paul |
Deepa Gupta |
Deepa.pme17 | Cooling of electronic equipment through Micro-pin fins |
Dr. Probir Saha & Dr. Somnath Roy |
Md. Anwar Ali Anshari |
anwar.pme17 | Friction stir processing and characterization of high strength metals and alloys |
Dr. Murshid Imam |
Anurag Kumar |
anurag.pme17 | esign of compact squeeze film damper |
Dr. Mayank Tiwari Dr. Akhilendra Singh |
Name | Area of Research | Supervisor(S) | |
---|---|---|---|
Anurag Kumar |
ashu.pm16 | Manufacturing | Dr. Anirban Bhattacharya |
Atul Ranjan |
atul.pm16 | Flow boiling in microchannels | Dr. Manabendra Pathakand Dr.Mohd. Kaleem Khan |
Madhu Ranjan Gunjan |
madhu.pm16 | Droplet dynamics, Condensation | Dr. Rishi Raj |
Ranajit Kumar Chakrabarti |
Dr. Somnath Roy | ||
Ravi Kumar |
ravi.pme16 | Dr. Somnath Sarangi | |
Vijay Kumar |
vijay.pme16 | Pool Boiling Enhancement | Dr. Manabendra Pathak and Dr. Mohd. Kaleem Khan |
Piyush Kumar |
piyush.pme16 | Dr. Manabendra Pathak | |
Priyabrata sahoo |
priyabrata.pme16 | Micro milling | |
Abhishek |
abhishek.pme16 | Dr. Sudhanshu Sekhar Panda and Dr. Subrata Kumar |
|
Akash Mukhopadhyay |
akash.pme16 | Dr. Probir Saha | |
Rishi Kumar Gupta r |
rishi.pme16 | Dr. Anirban Mahato and Dr. Anirban Bhattacharya |
|
Ashish Kumar |
ashish.pme16 | In situ analysis of tribology in manufacturing processes |
Dr. Anirban Mahato |
Krishnamurti Singh |
krishnamurti.pme16 | Dr. Mayank Tiwari and Dr. Anirban Mahato |
|
Bimal Das |
bimal.pme16 | ||
Desireddy Shashidar Reddy |
desireddy.pme16 | esign of compact squeeze film damper |
Dr. Sudheer Siddapureddy and Dr. Mohd. Kaleem Khan |
Kuldeep Awasthi |
kuldeep.pme16 | Dr. Mohd. Kaleem Khan | |
Kumar Nishant Ranjan Sinha |
kumar.pme16 | Dr. Rishi Raj | |
Krishan Sharma |
krishan.pme16 | Dr. Subrata Kumar | |
Krishan Sharma |
krishan.pme16 | Dr. Subrata Kumar | |
Rishikesh Kumar |
rishikesh.pme16 | Dr. Manabendra Pathak and Dr. Mohd. Kaleem Khan |
|
Shambhu Kumar |
shambhu.pme16 | Thermo-Mechanical Reliability of Electronic Devices |
Dr. Akhildendra Singh and Dr. Mayank Tiwari |
Anup Sankar Sadangi |
anup.pme16 | Vibration Based Energy Harvesting | Dr. Karali Patra |
Name | Area of Research | Supervisor(s) | |
---|---|---|---|
Sumit Raj |
sumitraj.pme15 | Bubble dynamics in Flow boiling | Dr. Manabendra Pathak and Dr. Mohd. Kaleem Khan |
Kartikeya Parmar |
kartikeya.pme15 | Computational Fluid Dynamics | Dr. Somnath Roy |
Ajeet Kumar |
ajeet.pme15 | Dielectric elastomer generators | Dr. Karali Patra |
Rinku Kumar Gouda |
rinku.pme15 | Pool Boiling | Dr. Manabendra Pathak and Dr. Mohd. Kaleem Khan |
Md Shamim Shah |
Dr. Probir Saha | ||
Bathina Chaitanya |
bathina.pme15 | Condensation on Superhydrophobic and Superhydrophilic coatings |
Dr. Rishi Raj and Dr. Ajay D.Thakur |
Durga Prasad Ghosh |
durga.pme15 | Multi-phase heat transfer | Dr. Rishi Raj |
Suraj Kumar |
suraj.pme15 | Root canal preparation, Micro machining |
Dr. Sudhanshu Sekhar Panda |
Ashwani Pratap |
Dr. Karali Patra | ||
Ram Bhushan Singh |
Fatigue and failure of materials | Dr. Akhilendra Singh | |
Alok Kumar |
alok.pme15 | Phase change heat transfer | Dr. Rishi Raj |
Ritesh Kumar |
ritesh.pme15 | Indirect Effect of Piezoelectric | Dr. Mayank Tiwari,br> Dr.Akhilendra Singh |
Name | Area of Research | Supervisor(S) | |
---|---|---|---|
Shuja Ahmed |
shuja.pme13 | Micro Friction Stir Welding | Dr. Probir Saha |
Md Qaisar Raza |
qaisa.pme13 | Phase Change Heat Transfer | Dr. Rishi Raj |
Pintu Kumar |
pintu.pme13 | Extrusion | Dr. Sudhanshu Sekhar Panda |
Kriti Arya |
kriti.pme13 | Biomechanics | Dr. Somnath Sarangi |
Deepak Kumar Prajapati |
deepak.pme14 | Tribology, Machine Design | Dr. Mayank Tiwari |
Nitish Kumar |
nitish.pme14 | Laser Machining | Dr. Subrata Kumar |
Md. Irshad Alam |
irshad.pme14 | Computational Fluid Dynamics | Dr. Somanath Roy |
Sathish GP |
sathish.pme14 | Robotics | Dr. Atul Thakur and Dr. Subrata Hait |
Chandan Kumar |
chandan.pme14 | Dynamics and Virbation | Dr. Somnath Sarangi |
Md. Moonim Lateefi |
moonim.pme14 | Continuum Mechanics | Dr. Somnath Sarangi |
Deepak Kumar |
dkumar.pme14 | Continuum Mechanics | Dr. Somnath Sarangi |
Dilshad Ahmad |
dilshad.pme14 | Dielectric Elastomer Characterization | Dr. Karali Patra |
Name | Area of Research | Supervisor(S) | |
---|---|---|---|
Tej Pratap |
tejpratap.pme13 | Micro-Machining Processes | Dr. Karali Patra |
Dhananjay Kumar |
dhananjay.pme13 | Dynamics and Virbation | Dr. Mayank Tiwari and Dr. Somnath Sarangi |
Pankaj Kumar |
pankaj.pme13 | Fracture Mechanics | Dr. Akhilendra Singh |
Aditi Raj |
aditiraj.pme13 | Fish-inspired Underwater Robotics | Dr. Atul Thakur |
Name | Area of Research | Supervisor(S) | |
---|---|---|---|
Ravi Shankar Anand |
Dr. Karali Patra | ||
Abdul Basit Ahmad |
basit | Vertical Two Phase Flow with Applications to Pumping |
Dr. Subrata Kumar |
Siddharth Suman |
s.suman | Sustainable; and Renewable Energy |
Dr. Mohd. Kaleem Khan and Dr. Manabendra Pathak |
Shashi Prakash |
spasthana | Laser Micromachining | Dr. Subrata Kumar |
Name | Area of Research | Supervisor(S) | |
---|---|---|---|
Manish Kumar |
manish.aspiring | Computational Fluid Dynamics | Dr. Somnath Roy |
Chandrakant Kumar Nirala |
spasthana | Laser Micromachining | Dr. Subrata Kumar |
Shashi Prakash |
nirala | Dr. Probir Saha | |
Yogesh Kumar Prajapati |
yogi06_sati | Two phase flow and Heat transfer | Dr. Manabendra Pathak and Dr.Kaleem Khan |
Name | Area of Research | Supervisor(S) | |
---|---|---|---|
Raj Kumar Sahu |
rks2010 | Smart Materials | Dr. Karali Patra |
Rupesh Kumar Pandey |
rupesh.pandey | Intelligent Manufacturing | Dr. Sudhanshu Sekhar Panda |
Md Ashique Hassan |
hassan | Computational Fluid Dynamics | Dr. Manabendra Pathak and Dr. Mohd. Kaleem Khan |
Soumen Mandal |
soumen | Dr. Subrata Kumar |
Name | Area of Research | Supervisor(S) | |
---|---|---|---|
Himanshu Pathak |
himanshu | Computational Fracture Mechanics | Dr. Akhilendra Singh |
Firozut Tauheed |
firoz59 | Continuum Mechanics | Dr. Somnath Sarangi |